tyt-h55-v5n Datasheet schematic need . It would be great if the bios file is also included. Is there anyone to help?
tyt-h55-v5n Datasheet schematic
Collapse
X
Related Topics
Collapse
-
by Dr TechnoHi Guys,
I need a motherboard schematic for file for a AORUS 15P XC please. The EXACT motherboard is ga-rx5lxc rev2.0. It currently has a black screen issue and doesn't display to external display but boots into windows and can also display externally when running ubuntu. If anyone has a motherboard schematic file and boardview for this laptop it would be greatly appreciated. Thanks in advance!-
Channel: Schematic Requests ONLY!
05-01-2025, 01:45 PM -
-
by m1ch43lzmHi everyone
I noticed on the Xgpro software the BIOS backup files have extra bytes at the end when reading some chips, this is because the Xgpro software also reads the OTP region of those flash chips, and by default will append that region to the saved file
Programmer models: XGecu TL866II Plus / T48 / T56 / T76
Example: GD25LQ128D (1.8V), IC size is listed as 0x1000000 Bytes (16777216 bytes) + 0xC00 bytes, those extra 0xC00 bytes will be appended to the end of the saved file by default, resulting in a file size of 16780288 bytes
There's also an extra OTP Secu.R...-
Channel: BIOS Requests ONLY!
-
-
by wasylHi, did not found here so uploading to help...
-
Channel: Schematics and Boardviews
09-15-2025, 07:40 AM -
-
by evgentalHey everyone,
I'm looking for a schematic or datasheet for this mini PC. I want to see if I can add another NVMe slot, since my motherboard only has one. If anyone has it, please share. And if you have a motherboard with two NVMe slots, can you send some high-quality pics so I can figure out how to reverse-engineer it and give it a try?
Thanks a lot!-
Channel: BIOS & Schematic Requests!
-
-
by GGEZHi. I have a lenovo 16IAH7H (NM-E231) with a small amount of water spilled on the RT8816CGQWGPU buck converter. When powering on, keyboard lights up, fans will spin slowly. CPU and GPU are getting hot. No image. Not via HDMI either.
Part number is PU4001. The liquid spillage looked minor so I cleaned it up with some alcohol and cleaned ups some crusty joints with solder and flux.
BoardView and schematic is provided. The buck converter diagram is on PAGE 107.
I'm inquiring about any troubleshooting tips like probe points to measure and such. I can... - Loading...
- No more items.