I've got a gtx 1070 no display all rails present not showing up in device manager or gpuz.
Core voltage is only 0.67volts is this to low to "boot" core.
Up9511p controller.
My vrefin is 0.8v vref is 2v and my vinmon is 1.2v
Pic aof output after capacitors on gpu vrm
Core voltage is only 0.67volts is this to low to "boot" core.
Up9511p controller.
My vrefin is 0.8v vref is 2v and my vinmon is 1.2v
Pic aof output after capacitors on gpu vrm
Comment