Anyone encountered this problem ? I attached a photo of how the card is seen in HiveOS . I checked voltages and resistace and they all seem good . Also voltage on the Bios chip . Anyone has any clues or can point me somewhere regarding this ? Thanks
Announcement
Collapse
No announcement yet.
GTX 1060 6GB - Not Recognized Properly
Collapse
X
-
Re: GTX 1060 6GB - Not Recognized Properly
Originally posted by foshland View PostDid you try in windows? look what gpu-z tells about it bios rom, maybe it was modified. What make and model is it?
Comment
-
Re: GTX 1060 6GB - Not Recognized Properly
Originally posted by foshland View PostHi, look at the front and at the back of the card, it uses to have 2 bios chip, dont really know why, but all the nvidia cards I have has 2)))
Comment
-
Re: GTX 1060 6GB - Not Recognized Properly
Originally posted by Goblin999 View PostYes , I just did that right now . Changed BIOS chip with a reflashed one from TECH and it is the same . I will upload a gpu-z picture . it does not see the BIOS chip as far as I can tell- I didn`t installed the drivers though because it give me a blue screen
Check R740, R753, R741, R728 and C968Last edited by benwaterson; 02-25-2022, 10:28 AM.
Comment
-
Re: GTX 1060 6GB - Not Recognized Properly
Originally posted by Goblin999 View PostI will try the card in mats and see wheter it gets recognized or not
I managed to run MATS by booting with a primary card. Full of read errors.
I was thinking vBIOS, either the chip or the actual vBIOS. The one on TechPowerUp in unverified, but the same as the one on the card. I bought the card not working so do not know if the previous owner flashed the TechPowerUp vBIOS. I'm trying to track down someone with a working card with a known good vBIOS.
Comment
-
Re: GTX 1060 6GB - Not Recognized Properly
Originally posted by manuforti1314 View PostI have a GTX 1060 6gb Inno 3D Compact. Doing exactly the same thing. Mine loads the up to date drivers fine in Windows. Just GPU-Z is missing info and the sensors tab has only 4 sensor readings, which look wrong.
I managed to run MATS by booting with a primary card. Full of read errors.
I was thinking vBIOS, either the chip or the actual vBIOS. The one on TechPowerUp in unverified, but the same as the one on the card. I bought the card not working so do not know if the previous owner flashed the TechPowerUp vBIOS. I'm trying to track down someone with a working card with a known good vBIOS.
Comment
-
Re: GTX 1060 6GB - Not Recognized Properly
Originally posted by Goblin999 View Postsame problem here . I think we may have bad ram modules buddy
I'd love to just know if it is just one module, should be able to change that.
Comment
-
Re: GTX 1060 6GB - Not Recognized Properly
Originally posted by manuforti1314 View PostAn update on my INNO GTX 1060 Compact, flashed the stock Founders Edition vBIOS and things have changed a bit.
Seeing more in GPU-Z.
Need to do more work. I would love get an official dump from one of these cards. Might help even more.
Comment
Comment