Re: PNY Geforce Nvidia 6200 256MB PCI only
Maplins is closing down, they sold shit solder anyway.
I tried using kitchen foil on the leads and now some lead free sodler is stuck to the board, a blob of it that I cannot get off there, I tried using some CHEMTRONICS Desoldering Braid, Soder-Wick®, No-Clean, #3 Green, Static Dissipative Bobbin.
That just stuck to the board and did not do anything.
Then the solder tip went a black colour.
The solder just goes like a rock after using the 350 temp on it. It won't melt onto the braid.
Maplins is closing down, they sold shit solder anyway.
I tried using kitchen foil on the leads and now some lead free sodler is stuck to the board, a blob of it that I cannot get off there, I tried using some CHEMTRONICS Desoldering Braid, Soder-Wick®, No-Clean, #3 Green, Static Dissipative Bobbin.
That just stuck to the board and did not do anything.
Then the solder tip went a black colour.
The solder just goes like a rock after using the 350 temp on it. It won't melt onto the braid.
Comment