Capacitor detached from PCB – RTX 2070 Super Founders Edition

[MORETTIGIAN]

Title:
Capacitor detached from PCB – RTX 2070 Super Founders Edition

Description:
During maintenance on an RTX 2070 SUPER Founders Edition, I found a capacitor lying on my desk after reassembly.
I did not notice it detaching, so I am unsure of its original location on the PCB.

Procedure performed:
- Removed backplate
- Cleaned heatsink and PCB with isopropyl alcohol + soft ESD brush
- Reapplied thermal compound
- Reassembled card

Observed behavior after reassembly:
- GPU powers on and operates normally under load
- Furmark 2 stress test ran ~20 minutes, stable, slightly higher score than before cleaning
- Temps: 86 °C core / 99 °C hotspot
- However, the "GeForce RTX" side LED did not light up

After shutdown and disassembly to verify fan/LED connector seating, I noticed the capacitor on the desk.
I have not powered the card on again since then.

My assumption:
Since only the LED stopped working, this capacitor may belong to the LED/boost circuit.
However, I cannot identify the exact pad location or value.

Attempts so far:
- Compared PCB photos with images from TechPowerUp (and my own board), but could not identify missing component
- Aware that the 2070 Super FE PCB shares layout similarities with the 2080 FE

Request:
Assistance in:
1. Identifying the capacitor type/specs
2. Locating the exact position on the PCB where it belongs

I have little experience with board-level electronics, schematics, or boardview tools.
Any guidance would be greatly appreciated.

Thanks in advance.

[stj]

on the back of the board,
where it says "made in china" there are 2 holes - look below the second one

[stj]

on the back of the board,
where it says "made in china" there are 2 holes - look below the second one

[MORETTIGIAN]

Thank you so much. You actually found it! That was so fast.
I have 0 experience with solder, would it be a stretch if I asked you for a beginner friendly tutorial on how to solder it back?