Hello.
It's been a while since I've been here.
The homepage was slightly changed, but the previous homepage missed it
I'm glad it's still active.
intel nuc d54250wykh
It is a product and there is a problem with the 2.2 ohm resistance in the 19 volt part, so after replacement
3v and 5v come out normally but turn off as soon as you turn it on.
There is a problem with pch power s2~s1, so at the end as shown in the picture
I have a fever.
The problem is that I want to take advantage of this opportunity.
Same model 4250u code sr16m is expensive
Is it compatible when I replace it with a 4300u code sr1ed product?
Is it possible to add microcode to bios after cleaning.
It's been a while since I've been here.
The homepage was slightly changed, but the previous homepage missed it
I'm glad it's still active.
intel nuc d54250wykh
It is a product and there is a problem with the 2.2 ohm resistance in the 19 volt part, so after replacement
3v and 5v come out normally but turn off as soon as you turn it on.
There is a problem with pch power s2~s1, so at the end as shown in the picture
I have a fever.
The problem is that I want to take advantage of this opportunity.
Same model 4250u code sr16m is expensive
Is it compatible when I replace it with a 4300u code sr1ed product?
Is it possible to add microcode to bios after cleaning.