Hello,
I have a RTX 2080 that is broken, but interesting thing is that the card works how it should work, but when playing the card crashes, black screen fans go to 100% and nothing happens anymore. I changed thermal paste because I thought it was overheating, but no. So I checked with gpu z and here is what I had.
After a while a dude I got friends with told me to underclock the gpu via msi afterburner. First to underclock the core speed by 200 then open the chart for the mhz and voltage and said that I should change the mhz at 0,9v to 1900mhz. Since then I doesn't crash anymore.
Now I want to go deeper and find out why it's crashing. So I started mats/mods and had this two things. I did
•/mats -e 5 |less
and then a script i found online
100
The first one I failed and hat errors on every memory bank and on the second one I passed but had the error „Mode is not possible for display Ox100, head
0"
What does this error mean? Because after the second test the screen turned black the gpu resumed to behave normally but I had no signal on the monitor. The PC didn't freeze because I could type in poweroff press enter and the pc would shut off.
I have a RTX 2080 that is broken, but interesting thing is that the card works how it should work, but when playing the card crashes, black screen fans go to 100% and nothing happens anymore. I changed thermal paste because I thought it was overheating, but no. So I checked with gpu z and here is what I had.
After a while a dude I got friends with told me to underclock the gpu via msi afterburner. First to underclock the core speed by 200 then open the chart for the mhz and voltage and said that I should change the mhz at 0,9v to 1900mhz. Since then I doesn't crash anymore.
Now I want to go deeper and find out why it's crashing. So I started mats/mods and had this two things. I did
•/mats -e 5 |less
and then a script i found online
- /mods gputest.js -test 118 -test 178
- dramclk_percent 100 -oqa -matsinfo -fan_speed
100
The first one I failed and hat errors on every memory bank and on the second one I passed but had the error „Mode is not possible for display Ox100, head
0"
What does this error mean? Because after the second test the screen turned black the gpu resumed to behave normally but I had no signal on the monitor. The PC didn't freeze because I could type in poweroff press enter and the pc would shut off.