I have a k7s5a that has 7 bad caps, 6 are in 2 rows near the cpu, and one just below that.
here's the row of 6:
http://divarin.net/~divarin/media/k7s5a-bad_caps-2.jpg
and here's a closeup of one, you see not only is it bulging but also oozing juice
http://divarin.net/~divarin/media/k7s5a-bad_caps-1.jpg
i decided not to get a kit for this and just to upgrade to a better board altogether since the value of a k7s5a is less than the cost of a kit... if i should just happen to get 7 new caps that will work maybe I'll make a project out of getting it to post again, but that's not very likly
here's the row of 6:
http://divarin.net/~divarin/media/k7s5a-bad_caps-2.jpg
and here's a closeup of one, you see not only is it bulging but also oozing juice
http://divarin.net/~divarin/media/k7s5a-bad_caps-1.jpg
i decided not to get a kit for this and just to upgrade to a better board altogether since the value of a k7s5a is less than the cost of a kit... if i should just happen to get 7 new caps that will work maybe I'll make a project out of getting it to post again, but that's not very likly