where can i buy these caps?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • aidynphoenix
    Member
    • Jan 2012
    • 34

    #1

    where can i buy these caps?

    i have a 9800gt here to recap
    it has two 1500uf 6.3v panasonic FJ
    two 470uf 16v

    it has a few ucc polymers..
    but those are probably ok..
    where can i buy em?
    neither mouser or digikey seems to have them.
  • Topcat
    The Boss Stooge
    • Oct 2003
    • 16956
    • United States

    #2
    Re: where can i buy these caps?

    The panasonics have failed? that's an oddity for sure.

    These will be fine in their place:

    https://www.badcaps.net/store/produc...roducts_id=147
    and
    https://www.badcaps.net/store/produc...roducts_id=148
    <--- Badcaps.net Founder

    Badcaps.net Services:

    Motherboard Repair Services

    ----------------------------------------------
    Badcaps.net Forum Members Folding Team
    http://folding.stanford.edu/
    Team : 49813
    Join in!!
    Team Stats

    Comment

    • mariushm
      Badcaps Legend
      • May 2011
      • 3799

      #3
      Re: where can i buy these caps?

      FJ is not available in retail.

      It looks like FM series is adequate to use instead of FJ:

      fj:


      1500 @ 6.3 : 2000mA , 0.018 ohm
      470 @ 16 : 1540mA , 0.025 ohm


      fm:

      1500 @ 6.3 : 2180mA , 0.019 ohm
      470 @ 16 : 1290mA , 0.038 ohm
      470 @ 25 : 1790mA, 0.026 ohm


      use 470@25v fm and 1500uF @ 6.3 fm and you'll be fine.

      ^^^ Or get what Topcat recommended. He was faster than me.

      Comment

      • aidynphoenix
        Member
        • Jan 2012
        • 34

        #4
        Re: where can i buy these caps?

        thanks guys!
        i don't yet understand what values are considered high or low when reading the specifications so i cant really pick out replacements.

        Comment

        Related Topics

        Collapse

        • eryjus
          Heathkit IO-4205 Power Supply Caps
          by eryjus
          Hello,

          First, I am a complete noob with high voltage stuff. I'm learning, but I need help by someone looking over my shoulder.

          I recently came into posession of a Heathkit IO-4205 5MHz Dual Trace Oscilloscope. The documentation is copyright 1978. I'm told it works.

          I opened it up to check the caps before I applied power, and found the following black caps and wanted to know what they were. They are on the power supply board. I was able to read the name and model and came up with, "Nytronics 162J-1, 0.1uF, 20% tolerance, 2000VDC."
          ...
          05-10-2023, 11:21 AM
        • Paxman_Swede
          Identifying caps on an old Zoom 9000
          by Paxman_Swede
          Hello!

          I have two projects on my work bench. One is a friends dead JBL Xtreme speaker with a blown voltage regulator and corresponding bulged and shorted cap. That cap has clear markings so I know what replacement I need for it.

          The other project however is a whole different deal. It's a Zoom 9000 guitar effect from the 90th that has developed a devil hound howl when there is no input from the guitar. I'm guessing caps problem. So, since I don't really use this effect anymore I thought it would be a perfect project to learn on.

          I have studied the board and...
          01-14-2025, 09:51 AM
        • momaka
          Seasonic B12 BC-550 – barely 2 years old and with BAD CAPS already!
          by momaka
          I know I've been a little scarce lately (like the last 2-3 years), but I'm still here and still doing my thing with fixing PSUs.

          For today's considerations, I have a Seasonic B12 BC-550 [A551bcafh] 550 Watt ATX power supply for you (click on links for full size images).

          https://www.badcaps.net/filedata/fetch?id=3591771


          https://www.badcaps.net/filedata/fetch?id=3591772

          It's a modern ATX unit with fixed (non-modular) cables and an 80-plus bronze certificate. Here's the label:

          https://www.badcaps.net/filedata/fetch?id=359177...
          03-12-2025, 03:42 PM
        • captain150
          Help with switching power supply caps
          by captain150
          I'm trying to repair two old VCRs, they both have bad caps. One has leaky ones, the other would barely run until I subbed in some caps from another power supply I had laying around (though they are the wrong values). This vcr works for an hour or two, but then the power supply starts whining and the picture gets lines in it. I didn't replace all the secondary caps, so another voltage might still be problematic, or the values I used are too far off.
          I've been on mouser and digikey but the options are a bit overwhelming. I just need some new ones that will work. They don't need to be top quality,...
          03-16-2025, 07:34 PM
        • Foetuss
          Gigabyte GA-6OXT :: caps question
          by Foetuss
          Good evening

          I recently aquired a rev 1.1 Gigabyte 60XT, and was suprised of the amount of leaking caps for a motherboard of the P3 era. Especially the way the 330µf caps seems like the housing discolored even.
          Now, there are some 3300µF 6.3V KZG series around the CPU. Would it be OK to replace them with something like EEUFR1A332 ? (Panasonic FR 3300µF 10V). Or was this board designed around very low ESR caps?

          But I was also suprised about the bigger boys, which are 330µF 25V.
          Could it be they used 25V caps because they were cheaper / available at that time?...
          02-11-2025, 12:22 PM
        • Loading...
        • No more items.
        Working...