SSD SP A55 Firmware

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Moncefk
    New Member
    • Feb 2022
    • 2
    • Tunisia

    #1

    SSD SP A55 Firmware

    Hi


    I have a 1TB SP A55 SSD
    controller MAXIO: MAS1102B-B1C

    I want the firmware to solve his problem

    jm_id result: CONNECTED SATA AHCI

    v0.23a
    Drive: 0(ATA)
    Model: Generi Loader SATA Device
    Fw : 00000000
    Size : 0 MB [0.0 GB]
    ATA: SmartEnable failed! Error: 0x51
    ATA: ID2 failed! Error: 0x51
    ATA: ID2 failed! Error: 0x51
    ATA: ID2 failed! Error: 0x51
    Attached Files

Related Topics

Collapse

  • lamo
    Lenovo Carbon X1 9th(20XW). Failed to recover ME firmware.
    by lamo
    Hello. Customer tried to update BIOS via Lenovo software. Update has been failed and unit was dead completely. I found working BIOS dump and flashed it. Now unit turns on very slowly, and, after every booting it tries to recover ME firmware and fails everytime. Also, unit can't detect nvme disk, so i can't boot windows to flash ME with Lenovo software. Can someone provide to me 100% working dump? There're 2 flash IC's: U49 and U801. I flashed only U49. Thanks in advance.
    01-19-2024, 09:22 AM
  • gshark1
    Gaming laptop rtx 2070: Disappearing GPU after BSOD, Only using integrated graphic now
    by gshark1
    Hi, I've exhausted lots of software side options to try and fix why my nvidia 2070 GPU has disappeared from my gaming laptop MSI GL75-10SFK. The system boots and functions normally but only using Intel integrated graphics. Before, it was working fine then began having some blue screens. (I will attach the system event and mini-dump at the end of post). After a few days of the occasional BSODs it finally disappeared from device manager and never came back. I researched and attempted to troubleshoot this issue but im out of options and was wondering if yall had some ideas maybe on the hardware side....
    12-29-2023, 04:42 PM
  • Gibon378
    What caused the BSOD?
    by Gibon378
    Hello there!
    I was doing some usual stuff, browsing the internet, listening to music, coding, etc. and my computer froze. It looked like the website couldn't process the request (logging into the account, there was the loading symbol) and it took a few seconds, then my computer totally froze except for the mouse cursor. It lasted for about a minute and I got the BSOD. It happened yesterday and today (just now).

    I managed to get the MEMORY.DMP content, but I don't really understand it. Could somebody help me?

    Code:
    ************* Preparing the environment for Debugger
    ...
    06-23-2023, 06:20 AM
  • wattage
    AOC AG493UCX 49-inch monitor - Firmware request
    by wattage
    Hello Badcaps Community,

    I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.

    The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
    07-13-2025, 04:41 PM
  • Woodsworth
    PS3 CECHC03 60GB YLOD Troubleshooting
    by Woodsworth
    I have a post on psx-place for this but thought I'd try here as well in case anyone has experience or the schematics or any kind of help. Here's the original post from psx-place:
    START
    Hi, so I bought a YLOD Fat PS3 as I wanted a repair project and thought it would be a good way to get experience. I was able to solder to the RX, TX and Diag pads on the COK-002 motherboard and was able to get external access and retrieved the codes. I haven't powered it on beforehand so these should be the last ones. I did try to get internal access immediately after but kept getting scopen response...
    03-19-2024, 07:58 AM
  • Loading...
  • No more items.
Working...