Re: How to flash W25M02GVZEIG chips?
https://i.ibb.co/LvkHXyT/6264701360679268614-121.jpg
There you go. I have placed the images top-bottom in a mirror style.
So where the small pale yellowish dot is right next to the winbond name, bottom right side of the top image (the image of the chip), when I flip the board on the reverse side, those pins are right underneath the chip in the same spots/positions. At least it seems like it, I have no full proof way of confirming.
So when I reverse the board, where the red wire is attached to, it's the mirror opposite of where that pale yellow dot is supposed to be. That's my ground for seeing it as the ground point as well, unless I am mistaken and it's not the ground point.
@harp
https://i.ibb.co/LvkHXyT/6264701360679268614-121.jpg
There you go. I have placed the images top-bottom in a mirror style.
So where the small pale yellowish dot is right next to the winbond name, bottom right side of the top image (the image of the chip), when I flip the board on the reverse side, those pins are right underneath the chip in the same spots/positions. At least it seems like it, I have no full proof way of confirming.
So when I reverse the board, where the red wire is attached to, it's the mirror opposite of where that pale yellow dot is supposed to be. That's my ground for seeing it as the ground point as well, unless I am mistaken and it's not the ground point.
@harp
Comment