Linksys SD2008

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • bruferrit
    Senior Member
    • May 2011
    • 50

    #1

    Linksys SD2008

    I have a gigabit 8 port switch with (4) Stone 470uf 25v 105 deg C caps that are bad & (2) stone 1000uf 25v caps 85 deg C. I read a forum where a guy replaced them with Nichon 820uf 16v poly for the 1000uf & 270uf 16v poly for the 470uf, the input AC adapter is 12vDC. Will these work out for this application, or should I stick with electrolytic's?

    Bruce
  • mariushm
    Badcaps Legend
    • May 2011
    • 3799

    #2
    Re: Linksys SD2008

    They'll work, but it would be a waste of money.

    Electrolytic capacitors from good manufacturers would work.

    Use Panasonic FM or FR, Nichicon HE, UCC KZE, KY, etc, Rubycon ZL* ... digikey.com has plenty of them.

    Comment

    • bruferrit
      Senior Member
      • May 2011
      • 50

      #3
      Re: Linksys SD2008

      TY Mariushm. Kinda thought so but had to ask!

      Comment

      • bruferrit
        Senior Member
        • May 2011
        • 50

        #4
        Re: Linksys SD2008

        for the 470uf I'm looking at 667-EEU-FR1E471 from Mouser
        & for the 1000uf I'm looking at 667-EEU-FM1E102 from Mouser.

        Does that look good?

        Comment

        • mariushm
          Badcaps Legend
          • May 2011
          • 3799

          #5
          Re: Linksys SD2008

          Sure, no problem. Much better than those stone capacitors.

          Comment

          Related Topics

          Collapse

          Working...