Norecent LM965WA power led

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • badcap400
    Member
    • Sep 2015
    • 13
    • usa

    #1

    Norecent LM965WA power led

    Hello, so I just inherited an old Norecent LM965WA. It works but the power led keeps flashing green and yellow over and over. In addition, when a pc is booted the screen will show the initial boot for a moment and then black out. If one presses the power button, then screen comes back. Once the pc is fully up, no problems other than the flashing power led (green and then yellow, then back to green, repeat until pc is powered off).

    If I press the 1 menu button and hold, the led stays green. If I press the 2 menu button nothing happens (power led keeps flashing). In either case, the menus do not ever come up. But it does hold a picture and display otherwise without any problems. Just the control functions aren't behaving.

    Any ideas before I start tearing it apart? Still have to finish that Dell 1504FP.....
    Last edited by badcap400; 09-27-2015, 03:33 PM.

Related Topics

Collapse

  • Tynan Dill
    Vizio e601i-A3 - Has Sound and Display, But No Backlight - Bad Power Supply Board or Bad LED Bulbs ?
    by Tynan Dill
    I was given this TV from my great uncle. He said it just wouldn't turn on one day out of nowhere, replaced the TV, and gave it to me to possibly fix and use for myself.

    Upon bringing it home and plugging it up, it showed a standby light.

    I powered it on and without a flashlight, the display showed the "V" but the lighting is very dim, but visible.

    The screen seems to blackout and stay black, but with a flashlight I can see the display.

    With my Playstation 4 connected via HDMI, and running a game I can hear sound.

    Assuming...
    11-22-2024, 01:46 PM
  • PantherDave
    Microsoft Surface Pro (5th gen) model 1796 - no power
    by PantherDave
    Hi all!

    I'm trying to troubleshoot a Microsoft Surface Pro (5th gen) model 1796 that won't power on. Motherboard model is M1007506-015. My priority is retrieving data, but the SSD is integrated so it looks like if I can't repair it it'll need to go to a data recovery company. I've done a little basic board repair before, but nothing this advanced until now. So please forgive my ignorance in advance. 😅

    I found the boardview for this laptop in the forums here, and am able to open it on my PC with FlexBV.
    https://www.badcaps.net/forum/troubl...-hardware-devi...
    05-29-2024, 02:01 PM
  • STKR123
    Elitebooks (820, 840 etc. all gens) and those continuously flashing Power LED + flashing CapsLock LED
    by STKR123
    As the Elitebooks (820, 840 all gens) only show flashing Power LED and flashing CapsLock (continuously) + a very soft "ticking" noise near the DC Jack,
    I wonder if re-flashing the BIOS might be of any use here.

    As far as I understood, steady flashing either means insufficient power or a CPU/GPU/Motherboard issue. I use the original 65watt power supply.

    There are so many threads out there, but most of the solutions involve flashing codes, which I dont have or claim that you MUST use the original power supply, do a hard reset, reseat the RAM, clean the RAM,...
    11-03-2024, 06:58 AM
  • GLISIT
    Asus Probook P5440UF-XB74 power issue
    by GLISIT
    Hi all,

    TL;DR - this laptop is driving me nuts with the oddball power-related behaviors. Appreciate any insight you can provide!


    I'm experiencing a power issue on an Asus Probook P5440UF-XB74. Although I've worked with electronics and computers for decades, this is my first attempt at getting into motherboard-level component troubleshooting. Any help the community can provide is greatly appreciated!

    A few weeks ago I was using the laptop (on battery power) for a Zoom meeting. The battery was running very low (long meeting) but I wasn't worried about...
    01-16-2025, 02:29 PM
  • sam_sam_sam
    Desoldering gun station modified to use a 18 volt @ 20 amp switching power supply
    by sam_sam_sam
    I have wanting to do this project for quite sometime now and I finally found a switching power supply that will work on this desoldering gun station ZD-915 that the original switching power supply took a shit and just was not worth trying to fix it because this switching power is not quite big enough to handle the heater element and the vacuum pump

    One note when I tested the switching power supply and the voltage control board I noticed that this desoldering gun heat up much faster than the original switching power supply which I was really surprised by to the point that I might buy...
    03-31-2024, 02:12 PM
  • Loading...
  • No more items.
Working...