Samsung Syncmaster BW245 - Flickers when on, normally wont turn on, no blue light

[OberAgain]

Re: Samsung Syncmaster BW245 - Flickers when on, normally wont turn on, no blue light

So no one has any thoughts on these? I marked up the pics to make it easier to find and help with... has ripped solder pad problem and second problem I had (pic didnt really show it well enough) wondering if a scratch across the ~1" thick black band/trace around the bottom edge of the board is going to harm anything? if thats actually a useful part of the board (assumption is ground?) there is an example in 2nd pic post above...

Thank you much...

[OberAgain]

Re: Samsung Syncmaster BW245 - Flickers when on, normally wont turn on, no blue light

No help/suggestions?

[OberAgain]

Re: Samsung Syncmaster BW245 - Flickers when on, normally wont turn on, no blue light

Bumping again hoping to get some kind of response/advice... im wondering, cause it looks like there is still contact/layers under the pad i accidentally ripped off, can it just be soldered in place and have a chance at working or should i replace the component with a longer leg one and try to solder to the skinny leg of metal that the pad ripped from? Anything that might give a chance, i have nothing to lose really if there is something i can try...
Thanks again...
...Ober