I have a 3007WFPt with power board Liteon PA-4151-1-LF.
It appears to be DOA, but has some power on the board with a/c plugged in.
I am not sure if it is a power switch issue or not. (the power switch is a sense type, not a mechanical switch)
All caps have been replaced.
All power semi's test good out of circuit.
I do have 24v on pins 1-5 on P802 going to the inverter board, but no voltage on any pin going to the logic board(which is where the power switch plugs in)
Any help is much appreciated.
Brian
It appears to be DOA, but has some power on the board with a/c plugged in.
I am not sure if it is a power switch issue or not. (the power switch is a sense type, not a mechanical switch)
All caps have been replaced.
All power semi's test good out of circuit.
I do have 24v on pins 1-5 on P802 going to the inverter board, but no voltage on any pin going to the logic board(which is where the power switch plugs in)
Any help is much appreciated.
Brian
Comment