Samsung t220 problem

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • hercooles
    New Member
    • Sep 2011
    • 7
    #1

    Samsung t220 problem

    Hello!

    Main problem was that some menu push buttons "lived independent life". I changed the "up" and the "exit" button, now that part works fine.
    Right now the menu system is stable but the monitor turns off and on and off and on continuosly.

    The monitor's on/off switch is a one touch button between the monitor controller board and the menu switch board. If I plug out the menu switch board from the on/off board the monitor works fine. No turning off/on. So the power button should be OK.

    Any ideas?

    Thanks
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • CptChronic
      Samsung LU32J590UQUXEN Monitor display problem
      by CptChronic
      I have an intermittent display problem with my monitor, when I plug in the HDMI cable to my (or any) laptop, you see the connection screen shrink on the laptop as it usually would before displaying on the monitor but 95% of the time the monitor display stays black.

      Before it cut out all together, tapping the monitor control button a fair few times would make the screen display, and everything work fine.

      But now it never does it. Not sure what's going on, hoping someone can help. I'm capable of stripping the thing down and soldering in new parts if needed, or programming...
      04-24-2023, 04:33 PM
    • Document Archive
      Samsung Galaxy Book 2 Notebook Specification for Upgrade or Repair
      by Document Archive
      This specification for the Samsung Galaxy Book 2 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the Galaxy Book 2 boardview and Galaxy Book 2 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
      09-07-2024, 05:50 AM
    • glutton4punishment
      Samsung monitor Installed 1 cap wrong, now menu button dead, "no signal detected" msg
      by glutton4punishment
      Samsung synchmaster 226BW.

      Before I replaced 5 caps, the screen was dim.
      Sometimes it wouldn't turn on.

      I opened it up, and found 4 bad caps in the pwr supply section.

      I unfortunately installee one backwards, i.e. wrong polarity.

      When I turned it on, I head a loud pop, and I quickly shut it off.

      The replaced caps are 3 860uF 25V's, and 1 330u 35V.
      One of the 860uF blew.

      I didn't have another 860uF at home, so I tried it with a 1000uF 35V cap (I remember the reading of the 1k uF cap was close...
      03-18-2023, 12:49 PM
    • Document Archive
      LCD LED TV Service Menu Codes
      by Document Archive
      ALL LCD LED TV SERVICE MENU CODES

      Service Menu Code with Board Name

      China Universal Board / Jumper Board Service Menu Code
      Changhong Ruba Service Menu Code
      Ecostar LED TV Service Menu Code
      Orient LED TV Service Menu Code
      Haier LED TV Service Menu Code
      TCL LED TV Service Menu Code
      Samsung LED TV Service Menu Code
      LG LED TV Service Menu Code
      Videocon LED TV Service Menu Code
      Supra LED TV Service Menu Code
      Toshiba LED TV Service Menu Code
      Symphony LED TV Service Menu Code
      Veste/ LED TV Service Menu Code...
      10-31-2024, 03:58 AM
    • wattage
      AOC AG493UCX 49-inch monitor - Firmware request
      by wattage
      Hello Badcaps Community,

      I purchased a preowned AOC monitor that is not working and out of warranty. It was sold as not working. I am looking for guidance on self-repair. In particular, I am after the firmware for the monitor. At the end, I have included monitor model information and links to pics and vids of the issue.

      The problem is that it will not display a picture on any of its inputs. And the on-screen menu does not appear. The power button works properly. It powers on with the remote as well. But the on-screen menu does not appear, even when not connected to any...
      07-13-2025, 04:41 PM
    • Loading...
    • No more items.
    Working...