Announcement

Collapse
No announcement yet.

value capacitor for acer al1916 c??

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    value capacitor for acer al1916 c??

    Hello from spain

    need a Little suport , to resolve my problem of my monitor
    acer al1916

    the capacitor mark number "c153 and c159 " nof found the value the liquid is damage to value

    value for this ? check image


    thanks very thanks


    Last edited by hectorcrk; 09-16-2013, 09:38 PM.

    #2
    Re: value capacitor for acer al1916 c??

    Brand: delta
    pcb model: eadp-45af b
    cc:l

    Comment


      #3
      Re: value capacitor for acer al1916 c??

      This monitor uses the same power supply as the Viewsonic Q19WB-3. The service manual does not provide the part list for the power supply board, from my experience, C159 is for 5V power supply, you can use 1000uF 10vdc, C153 is for 12V power supply, you can use 1000uf 25VDC, both of them have to be LOW ESR type such as PANASONIC FM/FC/FR series. See page 61, 70 for the SCH.
      Attached Files
      Never stop learning
      Basic LCD TV and Monitor troubleshooting guides.
      http://www.badcaps.net/forum/showthr...956#post305956

      Voltage Regulator (LDO) testing:
      http://www.badcaps.net/forum/showthr...999#post300999

      Inverter testing using old CFL:
      http://www.badcaps.net/forum/showthr...er+testing+cfl

      Tear down pictures : Hit the ">" Show Albums and stories" on the left side
      http://s807.photobucket.com/user/budm/library/

      TV Factory reset codes listing:
      http://www.badcaps.net/forum/showthread.php?t=24809

      Comment


        #4
        Re: value capacitor for acer al1916 c??



        thanks you, testing tomorow , thanks









        Originally posted by budm View Post
        This monitor uses the same power supply as the Viewsonic Q19WB-3. The service manual does not provide the part list for the power supply board, from my experience, C159 is for 5V power supply, you can use 1000uF 10vdc, C153 is for 12V power supply, you can use 1000uf 25VDC, both of them have to be LOW ESR type such as PANASONIC FM/FC/FR series. See page 61, 70 for the SCH.

        Comment

        Working...
        X