LG M228WD TV / monitor 2 Seconds to Black.

[beachch]

Re: LG M228WD TV / monitor 2 Seconds to Black.

Sorry for the delayed reply but I was out of town for the weekend. I'm attaching the front and back pictures of both boards.

[tenyen]

Re: LG M228WD TV / monitor 2 Seconds to Black.

Heya,

On Saturday we fixed one of these and it was obviously, bulging, bad caps.

From memory its was the four 1000uF 25v in the bottom left corner of the power board.
On the original IMG_O453.jpg around the green bodied resistor (yeah I *should* be able to read it . .)

interestingly/ randomly it was brought in as not working as a TV (there was no aerial in the space we were in) but it appeared to work rock solid as a VGA monitor, possibly just luck.

thanks again for the great resource! I was almost upset that the problem was obvious and look forward to debugging lamps, not visually damaged caps and transistors . . .

werd,

[tenyen]

Re: LG M228WD TV / monitor 2 Seconds to Black.

Attached a pic.

They are Samwha brand 1000uF 25V caps.

Tweeted about it here:
https://twitter.com/RestartProject/s...9804968341504/