I have a problem with the denon avr x2000 where the zone2 analog audio and am/fm works fine. But on the main zone none of the channels are getting any sound (including analog audio with direct or pure direct mode). With some debugging it appears like the input card is switching the analog audio to the hdmi board. But there is no return audio signal. The hdmi card seems fine for video. Its just the digital audio path that is having issue.
The power amp path is fine for the main zone. When i patch the zone2 preamp signal manually to FR and FL, i can hear the audio on FR/FL.
Any clue if it is the ADSP21487 ? How do you debug the hdmi board ?
Here is a link to the service manual (thanks FrozenHaxor) https://www.badcaps.net/forum/showth...ighlight=x2000
The power amp path is fine for the main zone. When i patch the zone2 preamp signal manually to FR and FL, i can hear the audio on FR/FL.
Any clue if it is the ADSP21487 ? How do you debug the hdmi board ?
Here is a link to the service manual (thanks FrozenHaxor) https://www.badcaps.net/forum/showth...ighlight=x2000
Comment