LG Xboom PK5(B5) speaker. Need to flash the firmware.

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • xelyst
    New Member
    • Mar 2021
    • 2
    • Canada

    #1

    LG Xboom PK5(B5) speaker. Need to flash the firmware.

    Hello everyone,

    I found a similar thread with many getting ahold of demo units of the xboom speakers. Mine is a LG Xboom demo firmware PK5. I have the retail firmware .bin file but not sure exactly how to flash the file onto the nand.

    Any help is appreciated.

Related Topics

Collapse

  • codernov
    soundboks 3 bricked firmware ($600 bluetooth speaker)
    by codernov

    https://i.ibb.co/Z1hKTkwW/0001.jpg
    https://i.ibb.co/BK7YmhHx/2025-06-06-16-14-IMG-5818.jpg

    This thing is pretty expensive. More than an average notebook.

    Anyway. I got this job over facebook market place. Customer said he bought it used and it was working fine, then he decided to upgrade firmware and somewhere along the way the battery died or whatever we don't know, it got bricked. That's his story and he's sticking with it.

    If we connect power supply to it, we are getting 21 milliamps and nothing is happening. Pressing buttons does nothing....
    06-06-2025, 07:05 PM
  • FlashFireSix
    LG xboom PN5 stuck in demo mode(?). Looking for retail firmware.
    by FlashFireSix
    I took an ebay gamble on an LG xboom pn5 speaker which was listed as having battery issues (turning on then off).

    I got it earlier today and concluded it's in a demo mode because of the following:
    • When it's plugged in, it'll turn on and the power button will not turn it off
    • Battery is healthy, reading 4.2v and not swollen, charges according to the xboom app
    • the play/pause and volume buttons don't work
    • You can pair to it and play music fine, as long as it's connected to power
    • The bluetooth connection is disconnected after 5 seconds of audio pausing
    • The DTS setting is defaulted
    ...
    06-26-2024, 09:35 AM
  • corrize
    Nikon D800 camera - flash don’t work and capacitor don’t charge
    by corrize
    Hello, I'm stuck in troubleshooting…
    The flash system works like that : when the (mechanic) flash button is pressed, the flash mecanically pop up, and a circuit buck boost elevate 7v (batt) to 200-300v (?) for charging the big capacitor. And when the photo shoot button is pressed, the capacitor is discharged in the xeon light.

    In the D800, there is a first « power board » close to the battery. 2 wires (batt 7v) goes to another little « flash board ». I measured 7v, so ok.
    When I press the flash button, it's detected by the system, flash icon appear on LDC display....
    10-01-2022, 10:02 AM
  • TheUser
    Thinkpad Docker G2 Type-C 40AS - Firmware Unknown
    by TheUser
    Hello to everyone ,

    This is my first post here, and i would like to share with you a small story in case you can help me.

    Docker Type-C Gen 2 - Model 40AS. Was given to me by a friend for free ,but with the problem that you cannot use the video output ports.

    All ports work , USB , Ethernet, Type C ... but HDMI + Display Port don't work

    I searched on reddit and google for problem similar to that, and a LOT of people had fixed this problem by updating the firmware. So i tried , i searched and found 1.1.13 utility and 1.1.20 utility that can help...
    02-10-2024, 02:07 PM
  • gurj1979
    Ubiquiti firmware help. US-8-150W POE
    by gurj1979
    Hi guys.

    I've got a Ubiquiti US-8-150W POE switch which has issues with updating the firmware.
    Turned out to be a bad EEPROM chip. It would read the firmware and work as normal, but failed to write new firmware to it.

    So I took off the chip and read on EEPROM and saved it. Wrote to old chip and failed to write
    Got New chip and writes good.

    THE PROBLEM...
    It fails to fully load the firmware, POE lights fail to work during g firmware test during load. I'm suspecting bad EEPROM Read.

    Does anyone have a Good Firmware I can have?...
    07-22-2024, 05:13 PM
  • Loading...
  • No more items.
Working...