I have this receiver which works great - on screen GUI and all channels of audio are carried through, but the front display has stopped working! Confirmed that it's not a dimmer setting issue.
Searching around, it seems like this has happened to a few other people, but not super widespread. Others have mentioned that applying pressure causes the display to come back, but this hasn't worked for me. Tapping it in the right place would bring it back for a second or two for me.
Any ideas what could be the cause? Online posts have mentioned vague "corrosion", which I assume to be bad solder joints, but the board looks clean to me (photos attached).
Searching around, it seems like this has happened to a few other people, but not super widespread. Others have mentioned that applying pressure causes the display to come back, but this hasn't worked for me. Tapping it in the right place would bring it back for a second or two for me.
Any ideas what could be the cause? Online posts have mentioned vague "corrosion", which I assume to be bad solder joints, but the board looks clean to me (photos attached).
Comment