Marantz SR 7013 Modification

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • trunks81
    Badcaps Veteran
    • May 2020
    • 265
    • Nederland

    #1

    Marantz SR 7013 Modification

    Hello

    I was wondering if i could upgrade this amp like cine-mike does ?

    https://www.cinemike.nl/

    Which sections of the amps does he modifies ? and what kind of caps should i be using ?

Related Topics

Collapse

  • Petr0x
    Bosch 12V and 18V chargers modification
    by Petr0x
    Hi, I would like to share with you small modification to your Bosch tool 12V and 18V chargers.

    You can use it for almost all Bosch chargers what I have seen, for example part numbers GAL 18V-20, GAL 18V-40, GAL 1880, GAL 18V-160, AL 1820, AL1115CV, AL1130CV.

    Bosch (today also other brands using the same system like Wurth, Fein) does not care if you destroy your batteries, because they can sell you new ones. So the marketing is telling you only about speed of the charging, so you will not wait for your batteries to charge too long. Me as a customer want the tools and batteries...
    05-24-2024, 01:00 PM
  • acedogblast
    [Marantz SR5012] Center channel keeps going into ASO/Overcurrent protection.
    by acedogblast
    First off I would like to thank this community as it has provided me with great information that has helped me greatly on my repair for this Marantz SR5012 AV receiver. I am creating this new thread as the other 2 that I have created here has had their original question/problem solved and I plan that this is the final thread on my repair. Please note that this is my first time repairing audio amplifiers so I may not be aware of common issues and things to know.

    Lets start at what I have done so far. Random speaker popping on all channels is fixed by replacing the 2 large filter...
    03-01-2023, 08:24 PM
  • Mark R
    Marantz Model 150 Tuner "NULL" Adjustment..
    by Mark R
    I am not ashamed to say this is my first FM alignment I have ever done. I am well versed in electronics and repair. Been doing it for many years on Pro Audio Live sound equipment. Worked on Power amps EQ's musical gear and Large format Mixing Live consoles Etc. But now I can see this is a whole different world when it comes to tweaking this kind of gear. I do have the proper gear like the SENCORE SG 80 and HP Generators and Scopes Etc.

    Look below at Adjustment 12:8. The Null adjustment. I have a Heathkit IM-28 VTVM that was rebuilt and has new Burned in tubes that I used for this...
    12-30-2024, 03:18 PM
  • BigOof
    Marantz SR5007 popping on volume change and mute in Direct Mode
    by BigOof
    Hi,

    I bought a used Marantz SR5007 and it's giving me some issues that I can't seem to really place. It functions well in most settings, ARC mostly works, it has no issues driving my speakers in any of the digital input modes, but I'm having issues running analog inputs in direct or pure direct mode. For some reason in this mode there's distortion for every volume increment I give it, but once the volume is stable it has no issues. Muting creates a loud pop, switching to another source also causes a pop and so does turning off the amp in that mode. Again, no issue in the digital modes....
    12-12-2024, 06:15 AM
  • oshimapt
    marantz sr6012 no sound
    by oshimapt
    hello guys,


    first of all i'm not a qualified repair guy, i am a diy guy and as years pass by i have some experience on repairing eletronics, and i'm hoping someone can share their experience.

    i have a marantz sr6012, some times it turns on and works normal, but after a while the sound cuts off or it starts getting distorted and then cuts off.

    when this happens there is no audio no matter the source used, and the OSD shows unknow audio signal from the source.


    i was reading very carefuly the service manual and it is all pointing for...
    10-17-2024, 09:49 AM
  • Loading...
  • No more items.
Working...