Re: JVC RX-6042 5 secs then shuts off
The schematic is here.
http://www.eserviceinfo.com/download.php?fileid=34224
Ovewrite PT 0 with PT 1 ...its an update
AT least 3-5 ? logic switches to get this beast powered up ?
Disconnect the psu and simulate the power up sequence ....check and monitor the PSU first
With a 60w bulb for load on the Power tx output.
Or use a variac
Depends on OPs experience with the iron ?
Then move on.
The schematic is here.
http://www.eserviceinfo.com/download.php?fileid=34224
Ovewrite PT 0 with PT 1 ...its an update
AT least 3-5 ? logic switches to get this beast powered up ?
Disconnect the psu and simulate the power up sequence ....check and monitor the PSU first
With a 60w bulb for load on the Power tx output.
Or use a variac
Depends on OPs experience with the iron ?
Then move on.
Comment