hi all, first time repairing (attempting to repair) a bluetooth speaker. Main issue is that bluetooth devices don't seem to recognize it exists when the unit is set to search. It seems to enter search mode as the lights change when you press the bluetooth button, but it remains unseen. I've got it opened up, and im looking around the area that the antenna connects to, havent seen anything out of place or shorted, or anything of the like. User said he dropped it and it stopped working so presumably could be anything. I've gone over the board for missing components, checked legs are soldered on any of the IC's, coming up short. Any ideas where to start? I was not able to find a schematic/service manual.
Minor update -- I found a pad on the back that says VCC_BT_3V3 and you may be able to guess but, it does not have 3.3v.. just 895mV for some reason.
Thanks
Minor update -- I found a pad on the back that says VCC_BT_3V3 and you may be able to guess but, it does not have 3.3v.. just 895mV for some reason.
Thanks