Need advice - hot tweezers under 300 usd

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • madfreak
    Senior Member
    • Aug 2012
    • 133
    • Poland
    #1

    Need advice - hot tweezers under 300 usd

    Hi folks, i really need dvice about hot tweezers for soldering smd

    I need them really bad to speed up the work but those that i like costs a little bit too much :

    JBC CP-2QF

    https://kaisertech.co.uk/jbc-cpd-mic...dering-station

    Maybe someone also has that kind of dilemma and has found something a little bit cheaper ?

    I will be really grateful for a help.

    Or maybe someone is rich enough and want to give me a gift ...i will give you address for the shipment

    Have a great day
    Last edited by madfreak; 05-11-2022, 12:31 AM.
    Tags: None
    • sam_sam_sam
      Badcaps Legend
      • Jul 2011
      • 6039
      • USA
      #2
      Re: Need advice - hot tweezers under 300 usd

      Do you want something that is micro in size because you can find a large version for probably less money and have different options for the tips

      Thanks for wanting advice for hot tweezers I found some for my soldering station that I like to use a lot but I have to maybe modify it slightly for it to work correctly with my setup

      Look on EBay for some there some different type of these tweezers but I would highly recommend that you buy one that is temperature controlled for best results

      Here is what I just bought from EBay

      https://www.ebay.com/itm/39403986360...53.m2749.l2649
      Last edited by sam_sam_sam; 05-13-2022, 01:00 PM.

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Borse2008
          Seeking Advice: Repairing Dell U3425WE Monitor with Faulty USB-C/Thunderbolt Ports
          by Borse2008
          Hi everyone,

          Looking for some advice or opinions on what to do with a monitor issue I’ve run into. Apologies in advance is this crossovers a few forum categories.

          I have a Dell U3425WE, which I've recently replaced with another model. That said, the original unit is still fully functional in terms of the display — it works perfectly over HDMI and DisplayPort. However, the USB-C and Thunderbolt 4 ports have stopped functioning correctly. The Issue:
          • The 90W Thunderbolt 4 port (circled in the photo) no longer charges or powers any device, including laptops or MacBooks.
          • There’s
          ...
          07-15-2025, 04:55 AM
        • Green Probe
          Mosfet Advice
          by Green Probe
          Hi, Im looking to replace some EMP21N03 mosfets on an Alienware motherboard, but I'm having trouble finding a legit supplier. The ones that are available from China have pictures with the engraved logo looking very scratchy and sketchy. Nobody in the US sells them. I'm trying to find a compatible mosfet, but I'm not well versed enough to be confident im making the right choice. Does anyone have a suggestion or advice that could help me find the right mosfet? Thanks!
          05-22-2025, 10:49 AM
        • user234
          Gigabyte Eagle 3060 Ti - Boardview / Advice request please
          by user234
          Hi all,

          Recently installed a new motherboard but during the process I seemed to have damaged my Gigabyte Eagle 3060 Ti card.

          My motherboard ROG STRIX B550-A is detecting an issue with the VGA (light ON)

          I have attached 2 photo's of my GPU board, one above and the other is what I believe to be the 5V - as you can see, this has visual damage so looks suspicious to me.

          If I replace this part what are the odds this will resolve the issue? - any additional information on where to source the parts would be much apricated too!

          This is...
          05-10-2025, 04:25 AM
        • redwire
          Hakko 950 SMT hot tweezers but no base or stand
          by redwire
          I got gifted a Hakko 950 SMT hot tweezers but no base or stand.
          Any suggestions for building one?

          "The 950 is compatible with the Hakko 936, 937, 939, 703, 926, 927 and 928 soldering stations." Apparently it has two heaters in parallel "24V 50W", one RTD temperature sensor 43-58Ω at room temp. 5-pin DIN.
          I don't have any of those, have a 470-2 (no RTD in) and a FX-888A.
          04-17-2025, 03:01 PM
        • artvandalai
          Advice on rewiring this stepup transformer?
          by artvandalai
          I bought this Chinese made step up transformer to run some 220v appliances. Some of the wires were brittle and broke off. I attempted to improve some of the wiring with spade terminals and heatshrink tubing as the wires were just soldered straight to the connectors. Any advice on how to rewire the broken wires on this step up transformer? I'm unsure how to go about rewiring this to a better safe working condition.
          6 Photos
          01-14-2025, 01:00 AM
        • Loading...
        • No more items.
        Working...