Announcement

Collapse
No announcement yet.

B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

    I think about buying one of them I would like to know if anyone has used this device before and what you think about it

    #2
    Re: B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

    At 150Va it's quite limiting what you can work on with it.
    My isolation transformer is 3KVa.

    Comment


      #3
      Re: B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

      Depends on what you want to do with it, yes, you can't use it for isolating 300W PSU at full load but for smaller devices and loads it should be fine.

      Would work fine for a AA5 radio.

      I have a B&K Precision TR-110 which is only 350VA, but it works well enough for my purposes. I think I burned the fuse once, forgot what I tried powering with it. May have been the nonisolated output...

      Comment


        #4
        Re: B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

        It's targeted for doing TV repair, 1.25A continuous and 2A intermittent 6lbs.
        Fine for troubleshooting and repair, but maybe a bit small if working on something that is loaded down past 150W.
        I can't remember if it has an electrostatic shield or not.

        Comment


          #5
          Re: B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

          Update

          I decided to buy this one instead because of your input on this post

          ISOLATION TRANSFORMER ISO-500 - 500VA

          https://www.ebay.com/itm/18075035223...53.m2749.l2649

          For the most I going to use it for computer switching power supply and small switching power supply for testing purposes ( with a variable transformer ) and not using it for continuously running a device

          Also using it for testing LED light bar strips when I do not know what voltage they are ( isolation transformer with the variable transformer ) using a testing jig
          Last edited by sam_sam_sam; 05-02-2021, 04:27 AM.

          Comment


            #6
            Re: B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

            True, I hate moving the 350VA unit around, heavy and nowhere to get a good grip on it, dropping it on your foot when moving it will sure do some damage...

            Comment


              #7
              Re: B&K Precision 1604A Isolation Transformr,120Vac,150Va,1Phase Feedback wanted

              I'd agree with Diif - I don't have a big a one as he does (oooh errr) but my isolation transformer is 2KVA.. Anything much less than that is too limiting IMHO. My Variac is also 2KVA BTW so they match perfectly.

              While testing High power stage lighting in the past, I have known for the thermal trip on my Isolation transformer to trigger - so for sure I know 2KVA is occasionally not enough
              Last edited by dicky96; 05-06-2021, 03:23 PM.
              Follow me on YouTube
              ------------------
              Learn Electronics Repair
              https://www.youtube.com/channel/UCFX...R8UZ2vg/videos

              Comment

              Working...
              X