Register programming information for ITE IT6263

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • japlytic
    Badcaps Legend
    • Oct 2005
    • 2086
    • Australia
    #1

    Register programming information for ITE IT6263

    I need to program specific registers including those for LVDS spread spectrum/termination/input levels/video format on an ITE IT6263 LVDS-HDMI converter - Seenku manufactures such a board with a microcontroller for initialization (but needs to be held in reset to enable programming via an external I2C master): http://www.seenku.com/Product/5012733441.html

    The only information I can find for programming the IT6263 (via I2C) is:
    https://cdn.badcaps-static.com/pdfs/...a5f220f7cc.pdf - this board supports the IT6263
    https://github.com/Freescale/meta-fr...mx8qxpmek.conf - as above
    http://www.catalina.com.cn/info_83748.html - IT6263 registers - signup required

    Any help would be appreciated.
    My first choice in quality Japanese electrolytics is Nippon Chemi-Con, which has been in business since 1931... the quality of electronics is dependent on the quality of the electrolytics.
    Tags: None
    Previous template Next

    Related Topics

    Collapse
    • DynaxSC
      ASRock B650M PRO RS - BIOS CHIP 25Q256JW BLOCKED BY STATUS REGISTERS
      by DynaxSC
      Hi

      I have a very strange issue with the BIOS SPI chip of an ASRock B650M PRO RS motherboard.
      The SPI chip is an Winbond 25Q256JWEQ model (1V8).
      The motherbaord doas not POST - it lits only CPU and DRAM EZ Debug Leds, and stays that way forever.
      The Flashback function of the motherbaord is also not working, despite all instructions followed correctly - I'm 100% sure of this.

      I have then desoldered the chip, backupped the contents, and tried to earease the chip in order to program stock image, but the chip is locked by status registers SREG2 (TB) and SREG6...
      08-04-2025, 12:20 PM
    • araxnido
      Programming KBC IT8987VG ASUS TUF FX506L RT809F+PEB
      by araxnido
      Dear friends, I want to share my experience repairing an ASUS TUF FX506L gaming laptop motherboard: DABKXDMB8E0_F_BKXD. Boardview and schematic are available, as well as the BIOS and ITE ROM.

      When the customer brought in this laptop, it was initially dead; it showed no signs of booting for any reason. After hours of measurements, checking each stage, MOSFET, and seeing if there was a short circuit in any capacitor, I discovered a strange 0.7V leakage voltage on the 3V_S5 rail, particularly on the PL9 coil, with the board not powered on. There were 3V_LDO and 5V_LDO voltages, which...
      06-10-2025, 09:26 PM
    • zlr8r
      Advice on newer EC chip programming eg. MEC5107-LJ BGA
      by zlr8r
      Hey all, was wanting to know what cheapest option is for programming EC chips such as the MEC5107-LJ

      i searched online and found such programmers as the SVOD4, Vertyanov Successor , and the RT809h type but didn’t see this particular BGA EC chips listed? So hoping for some advice here , cheers.
      09-16-2025, 09:54 AM
    • zesko
      MP2886A programming
      by zesko
      Hi everyone,
      I have a board with a dead pwm on mp2886a. I order the chip without thinking about programming, and now I just realize my mistake.

      Someone know if it's 100% needed to program the chip ? And if so, how to program it ? I see some dedicated board and software but, software is a bit tricky to me, the bad part of the job...

      p.s : with the dead pwm chip, the GPU work fine when I disconnect the shorted pwm (6), with the new chip Pgood is 0 and the gpu doesn't start, so I guess it need to be programmed, or it's fake chip..

      p.s 2 : Sorry for my...
      07-28-2025, 02:07 PM
    • hikesync
      XMCQH128A​ Programming issue
      by hikesync
      Sup guys i've been having a trouble with XMCQH128A chips, this is the only model that always fails to programming. All the others models and brands like Winbond, cFeon, etc. All works fine. But i just cant do it with XMC chips, is there some specific program that i must use? (i am using NeoProgrammer)


      ...
      06-26-2025, 11:22 AM
    • Loading...
    • No more items.
    Working...