Mosfet identification

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • sundancer
    Member
    • May 2010
    • 12
    #1

    Mosfet identification

    I have a r/c servo with some blow components two of which i think are dual channel Mosfets 1024 & 2024.

    I would post a pic of the board but don't have that ability anymore what changed?
    Tags: None
    • fzabkar
      Badcaps Veteran
      • Mar 2009
      • 772
      • Australia
      #2
      Re: Mosfet identification

      https://www.badcaps.net/forum/showth...223#post623223

        Comment

        Previous template Next

        Related Topics

        Collapse
        • Jane
          How do you test MOSFET in laptops ?
          by Jane
          I tried to use this method:

          Testing an N-channel MOSFET:

          Step 1: Discharge the Gate (turn off the MOSFET)
          Place the black probe (COM) on the Source (S) and the red probe on the Drain (D). The multimeter should show no continuity (high resistance or "OL" – open line).
          Then, touch the black probe to the Source (S) and the red probe to the Gate (G). This discharges any stored charge in the Gate, turning the MOSFET off.

          Step 2: Charge the Gate (turn on the MOSFET)
          Now, place the red probe on the Gate (G) and the black probe on the          ...
          09-27-2024, 03:31 AM
        • Document Archive
          MSI Modern 14 B11MOU-1024 Notebook 14 Specification for Upgrade or Repair
          by Document Archive
          This specification for the MSI Modern 14 B11MOU-1024 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 14 B11MOU-1024 boardview and 14 B11MOU-1024 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download...
          09-07-2024, 04:10 AM
        • guizmo1967
          Asus VG278 mosfet identification ?
          by guizmo1967
          Hello,

          My Asus monitor stop working today !! I found the problem on the main board, the power supply board is ok. It's Q9, a mosfet but I have no idea what are the specs since I don't have the schematic for that monitor !!

          Can someone help me identified this mosfet ?

          Thank you !
          1 Photo
          04-16-2024, 01:15 PM
        • Nooy
          VGA MOSfet permanently shorted and loss of MOSfet pad
          by Nooy
          Hello everyone, I recently found this badcaps site and super Learn Electronics Repair youtube channel. And I wanted to learn how to troubleshoot power supplies and VGA cards and how to practice soldering, since I already have a properly defective piece of them. I am currently trying to solve two problems:

          I have a Gigabyte GV-RX460WF2OC-4GD type card. I managed to find the faulty MOSfet (AON6414A) on it, which I replaced. The card starts up, but after about half a minute, the MOSfet in the same position will be shorted again. Is it possible that the PWM controller driving the MOSfet...
          02-14-2024, 02:26 AM
        • eastcoastcomputing
          Mosfet Identification on Rog G513QY
          by eastcoastcomputing
          Hi Guys, I'm trying to identify that mosfet to replace it. Any help would be appreciated. I've checked the IC Markings and Datasheet section but I can't match the brand logo with any of the pictures. I thought maybe Alpha Omega because of the greek symboles or maybe Sinopower as the logo vaguely looks like an S...

          It is on the motherboard of an Asus ROG G513QY (Motherboard ref: G713-6050A3254002-MB-A01).

          Thaks! ...
          09-19-2024, 07:42 AM
        • Loading...
        • No more items.
        Working...