Whichever engineer thought of this -- Thank you!

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • tom66
    EVs Rule
    • Apr 2011
    • 32560
    • UK
    #1

    Whichever engineer thought of this -- Thank you!

    I wanted to thank the nice engineer who had the frankly genius idea of laying out his board into distinct subsystems and labelling each.

    This will make diagnosis easier.

    I stumbled upon this image while researching parts for a TV. It's from an Orion LCD TV - it appears to be a small/medium Japanese company that still makes the occasional LCD TV (they used to make CRT TVs, which were very good as well.) It is also full of Rubycon capacitors, which is a big plus for reliability.

    http://assets.shopjimmy.com/media/ca...b04070529a.jpg
    Please do not PM me with questions! Questions via PM will not be answered. Post on the forums instead!
    For service manual, schematic, boardview (board view), datasheet, cad - use our search.
    Tags: None
    • retiredcaps
      Badcaps Legend
      • Apr 2010
      • 9271
      #2
      Re: Whichever engineer thought of this -- Thank you!

      I have seen this board or a very similar one before.

      While I don't know if this one has it, I like boards that are silkscreened on both sides. It makes identifying solder joints easier for the spatially challenged.
      --- begin sig file ---

      If you are new to this forum, we can help a lot more if you please post clear focused pictures (max resolution 2000x2000 and 2MB) of your boards using the manage attachments button so they are hosted here. Information and picture clarity compositions should look like this post.

      We respectfully ask that you make some time and effort to read some of the guides available for basic troubleshooting. After you have read through them, then ask clarification questions or report your findings.

      Please do not post inline and offsite as they slow down the loading of pages.

      --- end sig file ---

        Comment

        • twbranch
          Mad Nerd
          • Oct 2012
          • 153
          • USA
          #3
          Re: Whichever engineer thought of this -- Thank you!

          Some engineers are smart others just don'd give a shit!

            Comment

            • MDOC
              EngineeringTech
              • Mar 2010
              • 146
              • USA
              #4
              Re: Whichever engineer thought of this -- Thank you!

              It wasn't an engineer that did this. It was the management. Trust me.

                Comment

                • ben7
                  Capaholic
                  • Jan 2011
                  • 4059
                  • USA
                  #5
                  Re: Whichever engineer thought of this -- Thank you!

                  I love these kinds of boards too. If I were/become an electrical engineer, my PCBs would look similar to these
                  Muh-soggy-knee

                    Comment

                    Previous template Next

                    Related Topics

                    Collapse
                    • Document Archive
                      MEDION ERAZER Engineer X10 ERAZER i5-10400 Specification for Upgrade or Repair
                      by Document Archive
                      This specification for the MEDION ERAZER Engineer X10 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ERAZER Engineer X10 boardview and ERAZER Engineer X10 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
                      09-12-2024, 02:15 PM
                    • Document Archive
                      MEDION ERAZER Engineer P10 ERAZER i7-9700 Specification for Upgrade or Repair
                      by Document Archive
                      This specification for the MEDION ERAZER Engineer P10 can be useful for upgrading or repairing a desktop PC that is not working. As a community we are working through our specifications to add valuable data like the ERAZER Engineer P10 boardview and ERAZER Engineer P10 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet,...
                      09-12-2024, 01:58 PM
                    • Andre Gilbert
                      Panasonic TC-P55ST50 8 blinks then no blinks
                      by Andre Gilbert
                      Hello! yes I know there is already lots of information about this issue. I have a Panasonic TC-P55ST50 that originally displayed an 8-blink error code. Following the troubleshooting flowchart, I ended up replacing the SS board. However, even after replacing it, the issue persists. The TV turns on and stays on without displaying an image, and continuity is confirmed on all connectors. What am I missing here🤔?
                      Ok Im a mechanical engineer ...but I thought I was able to follow a rather simple flowchart for electric troubleshooting 😂.

                      TV Model: Panasonic TC-P55ST50
                      ...
                      1 Photo
                      11-20-2024, 08:52 PM
                    • RolandVossen
                      Kenwood Chef KVC50 / KVL60 / KVC5000 / KVL6000 / KVL6030 / KVL6050 kitchen machine repair
                      by RolandVossen
                      Hello,

                      I am attempting to repair a KVC50 kitchen machine. Problem is that speeds 1..5 on the speed dial do not work at all (motor is not engaged). The 'reverse' and 'slow' settings on the same dial however work properly. I removed the dial, its PCB components seems to be basic: a potentiometer, a microswitch, a couple of LEDs and a couple of SMD diodes or transistors. The dial has three cables with three connectors that hook up to the motor controller PCB. One connector (3 pins) for speed, one connector (5 pins) for the LEDs, and one connector (2 pins) for a safety switch that is...
                      3 Photos
                      03-16-2024, 03:55 AM
                    • BOSCHNJAK
                      by BOSCHNJAK
                      ABOUT ME INTRODUCTION FILE

                      2                      024 BEV, BIH, SARAJEVO START PROJECT: ELECTRIC VEHICLE TOYOTA 4 RUNNER CONVERSION http://www.bev.ba/TOYOTA4RUNNER/index.html
                      2023 BEV, BIH, SARAJEVO START PROJECT: SECRETS AND MANUFACTURING PLANS (AS MY REPLICA) OF THE LIBERTY ENGINE 2.0.
                      2022 BEV, PROJECT ?
                      2021 BEV, PROJECT ?
                      2020 BEV,BiH, Sarajevo: PROJECT IS: HOW TO SWITCH OFF PERMANENT MAGNET FIELD and HOW TO SWITCH ON PERMANENT MAGNET FIELD?
                      2019 BEV, Croatia, Ston:, Broce: PROJECT - PROJEKT ELEKTRIÄŒNI GLISER http://www.bev.ba/ELEKTRICNIVANBRODSKIMOTOR/indexHR.htm...
                      12-28-2023, 02:09 PM
                    • Loading...
                    • No more items.
                    Working...