Unknown part

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Tom41
    Badcaps Veteran
    • Oct 2005
    • 336
    • England

    #1

    Unknown part

    I just opened up one of my Netgear 10BaseT hubs to check for bad caps, and found THIS inside. United Chemi-Con KME caps, but what on earth is that green thing behind them?

    The hub also looks like it has the capability for a 15-pin AUI-style connector to be fitted, and also a coaxial plug, but there are no connectors - just the solder pads. Perhaps I could add them

    Edit: Added picture of the solder pads for the unused ports
    Attached Files
    Last edited by Tom41; 07-18-2006, 03:51 AM.
    You know there's something wrong when you open your PC and it has vented Rubycons...
  • kc8adu
    Super Moderator
    • Nov 2003
    • 8829
    • U.S.A!

    #2
    Re: Unknown part

    its an inductor.note the l number.probably part of the converter that provides supply voltage.

    Comment

    Related Topics

    Collapse

    • the_rem
      Unknown transformer : how to find a good replacement part ?
      by the_rem
      Hello guys,

      I would like a quite old but still good 800 W ATX PSU to be repaired. The problem was an extremely heavy coil whine coming from the small secondary transfomer on the PCB.

      I desoldered it hoping the references on the upper side would allow me to find a adequate replacement part. Sadly the written references drove me nowhere but to the manufacturer (I-MAG). I sent them a message like a bottle in the see asking them to send me a datasheet of the transformer. And... They responded ! I received a kind of datasheet (see attachment) but my competencies do not allow...
      04-23-2025, 01:48 AM
    • edugimeno
      Finding the wrong part at a loooong led strip, part works fine, part flickers, all parallel...
      by edugimeno
      Hi There!
      I'm trying to help my friend who owns a restaurant be just bought.
      He has a very long LED strip running along all the walls and columns. The strip is attached facing down 2in above the floor, using a wall panel that ends in a metal rail that finishes the panel underneath
      It's stuck using, I guess, the 2 sided tape that comes with the strip
      The issue is that like 1/2 of the full length, including 1/2 one wall, another entire wall, and one column, flickers after 4 or 5 minutes ON. Particularly it flashes staying OFF most of the time and flashing ON for 1 tenth...
      09-05-2024, 09:34 AM
    • G-Sting
      iPad Pro A1876 SHORT Part Identify Help Needed
      by G-Sting
      So My iPad was not charging and booting up . i went to a local technician and he checked with thermal and this Part marked in 1st Photo is Short.
      So then i went on to boardview and downloaded the schematics and identified this part in 2nd Photo. Now i am confused what exactly is the part called ? where should i get this from ?


      i contacted my technician and he sent me his BoardVIew screenshot in 3rd Photo. In his Boardview the part is called X2826.... Something

      SO My main concern is what part should i order what should i search the name for ?
      on Ipad...
      05-15-2025, 09:30 AM
    • Yanleb
      Panasonic part number in service manuals
      by Yanleb
      In the Panasonic service manuals, both in the board schematics and in the part listing, the part numbers that are given are Panasonic part numbers instead of the actual part numbers.

      This is especially annoying for small SMD components like diodes and transistors when you only have 1-3 digits printed on the component body.

      For an example, look at the attached PDF.

      Do you have a way to cross reference the Panasonic part number with the actual part number?

      Thanks....
      07-03-2023, 08:16 PM
    • FreakyMex
      Trouble to identify part (Lunii screen) for replacement
      by FreakyMex
      Hello guys. I'm a complete noob in electronics. I'd like to repair my child Lunii's (a "story box"), basically an audio player that allows the childs to choose between several options the places, characters, objects of the story, and then play a story according to the choice of the child. There is a screen that display the selected option before each choice. The Lunii fell and the screen is now broken.
      I'd like to repair it (probably just have to change the part, because the lunii still works perfectly fine) but I can't manage to identify the part/order it online. Do you have any...
      02-17-2025, 01:16 AM
    • Loading...
    • No more items.
    Working...