JYU Hornet S Drone - crashed board repair
Have a drone board my customer tried to repair broken connector and burnt off 2 resistors and there is also a missing capacitor i suspect was knocked off in the crash. can't find any info on these boards but There are two one on each side. they have the same parts however I cannot identify the SMD capacitor value since it is missing and the one on the good board is in circuit. (i would rather not have to de-solder it) I also am puzzled by the resistor markings all are marked 01C but i noticed the values are different, some are 10K some are 5K and a couple are 1K, all marked the same. Any help appreciated.
Will include photos in a few min.
Have a drone board my customer tried to repair broken connector and burnt off 2 resistors and there is also a missing capacitor i suspect was knocked off in the crash. can't find any info on these boards but There are two one on each side. they have the same parts however I cannot identify the SMD capacitor value since it is missing and the one on the good board is in circuit. (i would rather not have to de-solder it) I also am puzzled by the resistor markings all are marked 01C but i noticed the values are different, some are 10K some are 5K and a couple are 1K, all marked the same. Any help appreciated.
Will include photos in a few min.
Comment