Hello,
I have an ACER GD245HQ.
After unplug the AC cable et replug it the screen is totally dead.
No standby led and no power on when press power button.
I check the power supply board 5V and 22V are ok.
I try to reflash the eeprom MX25L1605A with an dump that i found it on web.
I check the 3 DC converters on main board it seem ok .
But always no power totally dead.
Have you an idea?
Thx
I have an ACER GD245HQ.
After unplug the AC cable et replug it the screen is totally dead.
No standby led and no power on when press power button.
I check the power supply board 5V and 22V are ok.
I try to reflash the eeprom MX25L1605A with an dump that i found it on web.
I check the 3 DC converters on main board it seem ok .
But always no power totally dead.
Have you an idea?
Thx
Comment