Have a SHARP LC-70LE857U found on craigslist (free) - given the 2 long blinks - 5 fast blinks code. Spent some time reading all the blogs about this - dis-connecting T-CON cables (4) got the set running. With 3 T-CON ribbon cables in (pic 3) right side (from back of set) ribbon cable is out. right side of screen display is good (pic 1). reconnected 4 T-CON cables and disconnect right side ribbon cable (from back) going to side buffer tabs - have screen display but darker on left side (pic 4).
I assuming I need to "cut" right side (from back of set) buffer ribbon cables off ??
I assuming I need to "cut" right side (from back of set) buffer ribbon cables off ??
Comment