Original capacitors: Chemicon kzg,3300uf, 6.3v, 105C
I've been watching the capacitors on this board for a while. A few months ago, I replaced two (badly domed) of the five with used ones as a temporary band aid. It helped the computer complete its self test and boot much more reliably.
The frequency of trouble has slowly increased since. I installed capacitors I ordered from Digikey:
Replacement capacitors: Panasonic CE FM, 3300uf, 6.3v, 105C
I'm quite experienced at soldering, however now the board will not show video, boot etc. The capacitors must be wrong. What capacitors should I buy and use? Also, where can I get them?
I would just throw this junk board out, but I want to get the computer working with its current OS install for about 8 more months or so.
I've been watching the capacitors on this board for a while. A few months ago, I replaced two (badly domed) of the five with used ones as a temporary band aid. It helped the computer complete its self test and boot much more reliably.
The frequency of trouble has slowly increased since. I installed capacitors I ordered from Digikey:
Replacement capacitors: Panasonic CE FM, 3300uf, 6.3v, 105C
I'm quite experienced at soldering, however now the board will not show video, boot etc. The capacitors must be wrong. What capacitors should I buy and use? Also, where can I get them?
I would just throw this junk board out, but I want to get the computer working with its current OS install for about 8 more months or so.
Comment