Lots of repair kits for this model including FET and replacement fuse on the PS board, EEPROM, chip caps for the main board and repair service where you need to send both boards in.
On my board there is no front LED. Fuse is not blown and I get 20V on P-ON+21V line. However, AMP+13V which powers main board measures 0V and is shorted to GND on PS board.
Service manual with schematic is available and replacement PS board around $20USD on ebay.
Will dig a bit further since I have a schematic before giving in and buying the PS board.
On my board there is no front LED. Fuse is not blown and I get 20V on P-ON+21V line. However, AMP+13V which powers main board measures 0V and is shorted to GND on PS board.
Service manual with schematic is available and replacement PS board around $20USD on ebay.
Will dig a bit further since I have a schematic before giving in and buying the PS board.
Comment