So , I have this Toshiba A300 - 10S - 15" screen.
With T3200 / ATI Radeon GPU on separate small board.And the screen stays black.
On power start all the leds are burning - sometimes it will reboot after 1 or 2 seconds.It sometimes reboots 3x in a sequence.
I have watched the video about replacing the NEC/Tokin cap.But I also did measure the voltage on the cap.It is around 0.9 Volts DC.
To me it looks good - or is the Tokin cap still not really good ??I will try to measure the ripple on the Tokin cap
I did a search on this forum and I have read many posts about this topic - but I hate to replace a cap that may be still good ....
Any thoughts ...
With T3200 / ATI Radeon GPU on separate small board.And the screen stays black.
On power start all the leds are burning - sometimes it will reboot after 1 or 2 seconds.It sometimes reboots 3x in a sequence.
I have watched the video about replacing the NEC/Tokin cap.But I also did measure the voltage on the cap.It is around 0.9 Volts DC.
To me it looks good - or is the Tokin cap still not really good ??I will try to measure the ripple on the Tokin cap
I did a search on this forum and I have read many posts about this topic - but I hate to replace a cap that may be still good ....
Any thoughts ...
Comment