Re: Infinity PS-12 Powered Subwoofer Fired Amplifier
Hello All,
New to hear - but a huge wealth of information - I just got a PS-10 from a Garage sale - that didnt power up - Internal fuse was blown - replaced the fuse and immediately blew- did some preliminary checking and form the Q18-22 MOSFETS were bad - replaced and powered up but lasted for about 3 sec and fuse blew again - check and mosfets bad again !
I began checking some voltages and i have some questions
What is the output voltage (DC) from the bridge- i have over 100vDC
What is the voltage After the (R6-&A) and (R9& R9) I have about 10v
What controls the 15V rails - I checked C5 and i have approx 8v but on C10 it is less then 1V
I also replaced TIP31C with the orig Q18,22 to be safe
There were also a list of CAPS that were know issues - replaced all of them as well
and Q2 and Q3
And help would be appreciated
Hello All,
New to hear - but a huge wealth of information - I just got a PS-10 from a Garage sale - that didnt power up - Internal fuse was blown - replaced the fuse and immediately blew- did some preliminary checking and form the Q18-22 MOSFETS were bad - replaced and powered up but lasted for about 3 sec and fuse blew again - check and mosfets bad again !
I began checking some voltages and i have some questions
What is the output voltage (DC) from the bridge- i have over 100vDC
What is the voltage After the (R6-&A) and (R9& R9) I have about 10v
What controls the 15V rails - I checked C5 and i have approx 8v but on C10 it is less then 1V
I also replaced TIP31C with the orig Q18,22 to be safe
There were also a list of CAPS that were know issues - replaced all of them as well
and Q2 and Q3
And help would be appreciated
Comment