Re: E470VA with a PLHH-Y009A - no power
Sounds like a good idea.
If you go ahead using glass fuses then slide a sleeve over it in the event that if it ruptures it does'nt spray glass everywhere.
Yes, I can do that. I will not be soldering those temporary fuses to the board. They will be used with alligator clips only, just to test if the TV is still causing blowouts. The permanent fuse will be soldered in later once repairs are done (if they get done).
I would have thought you could obtain these items from US suppliers or on Ebay.
That is an eBay shopping list.
Originally posted by dick_barton
View Post
If you go ahead using glass fuses then slide a sleeve over it in the event that if it ruptures it does'nt spray glass everywhere.
I would have thought you could obtain these items from US suppliers or on Ebay.
Comment