HP DV6, DAUT1AMB6e0, need dis to uma

[disorder]

hello all,

is there anybody got a schematics for dis to uma conversion, for dv6 with daut1amb6e0 revE motherboard ??
thank you

[caspian]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

it seems no schematics is available for this laptop. So the conversion will be difficult. check which one these schematics matches your mainboard:
https://www.badcaps.net/forum/showpo...5&postcount=10

[mcplslg123]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

afaik, conversion not possible on this platform.

[disorder]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

hello,
thank you.
finally i have done a reflow, it works, maybe not for a long time.
bye

[mcplslg123]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

hello,
thank you.
finally i have done a reflow, it works, maybe not for a long time.
bye

Reflow is not the solution-thats sheer wastage of time and flux. it wont last beyound 10-20 days. Change the chip instead.

[disorder]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

hello,
i know that, but i don't have a reballing machine for the chip.
thank you

[MD Arshad]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

it seems no schematics is available for this laptop. So the conversion will be difficult. check which one these schematics matches your mainboard:
https://www.badcaps.net/forum/showpo...5&postcount=10

Thanks bro

[lapfix]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

afaik, conversion not possible on this platform.

Is it same for this motherboard ! no possible conversion !
DV7 3000 daut1amb6e1

[Nabilos92]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

assalam alaikom can anyone help me to disable the graphic card for this dv6

[mcplslg123]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

Here you go

PCB HPMH-41-AB6200-D00G
PWA: HPMH-40GAB 00-D

TO CREAT INTEL BOARD

JUT REMOVE GFX COIL
PUT JUMPER IN M50 TRANSITOR IN LEG 2 TO LEG 3
THEN JUST SHIFT RJ8 RESISTOR PLACE 10K

[Nabilos92]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

Here you go

PCB HPMH-41-AB6200-D00G
PWA: HPMH-40GAB 00-D

TO CREAT INTEL BOARD

JUT REMOVE GFX COIL
PUT JUMPER IN M50 TRANSITOR IN LEG 2 TO LEG 3
THEN JUST SHIFT RJ8 RESISTOR PLACE 10K

can you give me datasheet please

[Vesko356]

Re: HP DV6, DAUT1AMB6e0, need dis to uma

can you give me datasheet please

https://www.badcaps.net/forum/showth...126#post464126

.