Got a wireless access point, LevelOne WAP-0003 v1
The device appears to work OK but all the caps are 'STONE' which according to the list here are junk.
I want to replace the lot with something decent, as even though it seems to work, one is bulging and the rest are probably half-stuffed as well anyway
The one which is bulgy is (the only) XR series (apparently high ripple and low ESR rated - datasheet attached if anyone wants it) and going by Stone's website, the rest are likely HR series (general purpose)
They are all as follows:
3 x 1000uf 10v 105*C
1 x 470uf 16v 105*C
5 x 220uf 16v 105*C
1 x 100uf 16v 105*C
1 x 680uf 6.3v 105*C 'XR'
The device appears to work OK but all the caps are 'STONE' which according to the list here are junk.
I want to replace the lot with something decent, as even though it seems to work, one is bulging and the rest are probably half-stuffed as well anyway
The one which is bulgy is (the only) XR series (apparently high ripple and low ESR rated - datasheet attached if anyone wants it) and going by Stone's website, the rest are likely HR series (general purpose)
They are all as follows:
3 x 1000uf 10v 105*C
1 x 470uf 16v 105*C
5 x 220uf 16v 105*C
1 x 100uf 16v 105*C
1 x 680uf 6.3v 105*C 'XR'
Comment