User Profile

[peste]

stop posting everywhere, stay here..

[peste]

if they have differences it's not good...after you write it back to the chip it might not work anymore..it has to be the same..

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow...

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[peste]

you have everything you need at post #52....
https://www.badcaps.net/forum/troubl...bios-plz/page3...

[peste]

try.. ...

[peste]

the bios posted is almost empty..read and post again..

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow...

[peste]

try.. ...

[peste]

try now......

[peste]

you have everything you need at post #9...08707
https://www.badcaps.net/forum/troubl...nv#post3647168...

[peste]

The posted bios has errors...read the bios chip and post again..
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow...

[peste]

try... ...

[peste]

post S/N, full name and model, motherboard model, ,etc.

post the contents of the bios chip even if it is corrupted..

The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow...

[peste]

The bios you posted is longer...
The bios chip must be unsoldered from the board before writing or reading..
do not use the clip, you may have errors..if you do not have anything to unsolder it with,
solder wires between the programmer and the bios chip..

you need an SPI programmer...here is a video for example..https://www.youtube.com/watch?v=DWWi...nnel=ThisIsHow

try.. ...

[peste]

post motherboard model, etc....

[peste]

post merged..next time look for a thread with the name and model, motherboard model of the laptop, and post there, if you can't find it, then make a new thread..

[peste]

try.. ...

[peste]

try.. ...

[peste]

post full name and model, motherboard model, .product number,etc....

[peste]

try...Admin password SILALAHI2004

Boot password SILALAHI2004...

[peste]

try post #2......