hi guys i installed Xubuntu 16.04 Chrome and Chromium asking for key-ring. 16.04 32bit how to remove password keying?also can you please give detail instructions how to write a scrip in the browser,thanks
-
Hi all , this unit has an issue on the back end input board .
Flexing the board causes cracking & distorted audio .
Struggling to isolate cause .... -
Hi guys i installed Xubuntu 18.04 and it boots and may run find but some times the display graffics go off wack and i have to reboot PC,i had to go back to Xubuntu 16.04 which runs find. e Machines ,amd Athlon IIx2 250U,video card integrated Nvidia card. -
This specification for the DELL G3 3590 Notebook can be useful for upgrading or repairing a laptop that is not working. As a community we are working through our specifications to add valuable data like the 3590 boardview and 3590 schematic. Our users have donated over 1 million documents which are being added to the site. This page will be updated soon with additional information. Alternatively you can request additional help from our users directly on the relevant badcaps forum. Please note that we offer no warranties that any specification, datasheet, or download for DELL G3 3590 Notebook is...09-06-2024, 12:13 PM
-
hi i have a lenovo m70q thinkcentre type 11E8 which is in chromium os i would like to change it in windows. Has anyone has dumpfile or backup file for bios for windows. in support web of lenovo m70q can be in windows os. hope someone can help me this one really needed badly thanks and more power most i downloaded on the web bios is in chromium os no lock at all i found here that m70q 11dt is not working for 11e8. -
Adding chip support is quite easy,there`s even some instructions included with NeoProgrammer,although its not obvious where they are
and once you do find them there`s a few crucial steps missing.
Extract chiplist.zip to a folder,the instructions are in Import_EN.txt and in Import.xml .Its the xml file where we add the new chip.
Open Import.xml with notepad or any other text editor.In this example i`m adding a Macronix MX77L25650F SPI_NOR chip.
After adding the chip save the xml file and copy it to the root directory of the...