Technical support.

[Leung Kai-yan]

Dear Friends,
Can I use a capacitor of 6.3 V, 3300 uf and 105 degrees C. to replace the one of 4 V, 3300 uf and 105 degrees C. Thank you.

[kc8adu]

Re: Technical support.

should be ok.
this 4v cap might be a polymer though.
post a pic.
welcome to badcaps!

[Leung Kai-yan]

The right question of looking for support.

Dear Friends,
Near the CPU, there are five capacitors of 3300 uF., 4V. and 105 degrees C., can I replace them with the capacitors of 3300 uF., 6.3 V. and 105 degrees C.? Thank you.

[Leung Kai-yan]

Re: Technical support.

should be ok.
this 4v cap might be a polymer though.
post a pic.
welcome to badcaps!

Dear Friend,
Thank you for your help. Does this also hold true in the case as mentioned in the right question? Thank you.

[willawake]

Re: Technical support.

why do you want to? have they failed?

[Leung Kai-yan]

Re: Technical support.

why do you want to? have they failed?

Dear Friend,
The reason is that the quality of the picture is not as sharp and bright as before. The motherboard is of Magic-Pro P4VM-800X. The result is opposite when running a computer of another motherboard. Thank you.

[willawake]

Re: Technical support.

i guess you are using onboard graphics?

The 3300 4v are polymer so if you replace with 3300 6.3 (not polymer) it is maybe worse choice but no problem if you do. best to use very low esr cap. Big Pope will supply

tell us what happens when you replace