BoardView for MSI MS-7B39, All Revisions - 1.0, 1.1, 0A, 0B, 0C (.CAD and .PCB formats) "Valve Steambox Motherboard"

Jalopy

New Member

Join Date: Jun 2024

Posts: 3

Country: USA
#1

BoardView for MSI MS-7B39, All Revisions - 1.0, 1.1, 0A, 0B, 0C (.CAD and .PCB formats) "Valve Steambox Motherboard"

04-09-2025, 02:53 AM

BoardView files for MSI MS-7B39.

All Revisions

Both (.CAD) and (.PCB) files included.

This is the BoardView for the "Valve Steambox Motherboard"

Attached Files

MSI MS-7B39 Motherboard BoardView ALL REVISIONS.rar (4.87 MB, 66 views)
Tags: None

Previous template Next

MSI Z390 A-PRO Schematic and BoardView

by Much Bugs

The Schematic and BoardView( *.cad ) of MSI Z390 A-PRO , the board model no is MS-7B98 Rev1.0-1.1 ....
- Channel: Schematics and Boardviews
06-24-2025, 10:13 AM
Lenovo Thinkpad T14 Gen 1 NM-C801 Schematics and Boardview

by Daniel Kubica

Hi, I needed a schematic and boardview for this motherboard earlier and I found out it's not available to download on here as the links expired, so I found it myself, hope it helps someone.

Schematics and boardview attached below....
- Channel: Schematics and Boardviews
06-25-2025, 05:02 AM
20 year old Kenmore refrigerator ice maker bad water valve coil took a crap

by sam_sam_sam

I got lucky that when I got home and was about to get some ice out of the ice dispenser I hear and see water running down the outside of the ice dispenser what the heck is going on here

At first I thought that the ice dispenser mold was cracked so I brought a new ice maker because this one has been in there for about 10 years now

Well I put the new one in and wait and I wait for the water valve to open and let water in no such luck well there is a way to check the function of the motor and the water valve on this ice maker just need a jumper wire “L” to...
- Channel: Troubleshooting Appliances and other Household Electronic Stuff
04-09-2023, 08:04 PM
Surface PRO 7 Plus 1960 Boardview needed

by rmfr1225

Hello everybody,

I have the schematics already of this device but no boardview and it is being very difficult to locate the fault.

I have +3P3VAS but then nothing else, I suspect something related with 1V8 regulators, but without boardview it is very difficult to locate those components and or pads to test.

Does somebody has the boardview of this model? Or can point out where to test?

Thanks!
- Channel: Schematic Requests ONLY!
05-12-2025, 03:29 AM
Asus Pro WS WRX80E-SAGE SE WIFI BoardView Request

by Herbs n spices

If anyone has the boardview and can share I would greatly appreciate it! I have the repair guide, but I still need the boardview. My BMC cannot initialize, likely due to damage around the enable switch....
- Channel: BIOS & Schematic Requests!
05-06-2025, 08:48 AM
Loading...
No more items.

BoardView for MSI MS-7B39, All Revisions - 1.0, 1.1, 0A, 0B, 0C (.CAD and .PCB formats) "Valve Steambox Motherboard"

BoardView for MSI MS-7B39, All Revisions - 1.0, 1.1, 0A, 0B, 0C (.CAD and .PCB formats) "Valve Steambox Motherboard"

Related Topics