hello, i have the gpu in the title and a resistor fell off that i need help finding the resistance of. does anyone have the schematic or the resistance value? see images below for the one missing.
Attached Files
-
I'm looking for boardview (or schematic, or even some hi-res board photos of the board) for a Zotac Gaming Geforce RTX 3060 AMP WHITE ED 12GB (P/N 9288-BN617-210Z8).
Trying to fix one, but someone really messed up the board badly already and I don't know what is missing....
...04-17-2025, 03:16 PM -
I have Razer Blade 15 RZ09-0328 MOBO: DA550-MB MP V4.0 20200227 with liquid damage.
I need to know value of resistor on photo. Thanks for help. ... -
Elco (?) 50" Smart TV. Backlight ( BL) issue.
Single Board : TP.SK708D.PC821
I bought new BL set . - OK
Power up : Blip . Protection.
Led Tester shows current at 34.2 mA , Previously it was 42.1 mA
Solution : Change current output .
The BL IC is marked on the photo and datasheet is QOB33535 Datasheet(PDF) - Schneider Electric (alldatasheet.com)
Calculating according to the datasheet - see attached photo :
With ILed = 34.2mA , equation #1 is RFb = 400mV / 34.2 = 11.7 Ohm , and with 42.1 mA we get 9.50 Ohm . i.e I should look for 9.5 Ohm...06-09-2024, 12:25 PM -
NVIDIA GeForce RTX 3060 Schematic & Board View
The GeForce RTX 3060 12 GB is a performance-segment graphics card by NVIDIA, launched on January 12th, 2021. Built on the 8 nm process, and based on the GA106 graphics processor, in its GA106-300-A1 variant, the card supports DirectX 12 Ultimate. This ensures that all modern games will run on GeForce RTX 3060 12 GB. Additionally, the DirectX 12 Ultimate capability guarantees support for hardware-raytracing, variable-rate shading and more, in upcoming video games. The GA106 graphics processor is an average sized chip with a die area...10-02-2024, 08:03 AM -
Hi
I am trying to repair an ancient Dell 2209WA Monitor which suddenly shut off with a pop sound. On investigation found that one of the fusible resistors had blown. Further investigation identified multiple components as faulty because of which the fusible resistor blew. Please refer the attached circuit diagram showing the components that were found to be damaged.
1. FR950 - blown fusible resistor - 0.2 Ohm 1W
2. Q950 - shorted Q950 MOSFET - 650V 10A N Channel Mosfet
3. R835 - Blown Resistor - 20KOhm SMD resistor
4. D930 - Shorted Schottkey Diode...