Ok, the radio turn on but the display flickers on-off quite fast, nothing is displayed - caps look ok but may be toasted anyway.
So what would cause the display to behave like this ? Is this perhaps a psu problem and a cap that shorts to ground ?
When I measure voltage to the display it varies between 3.003 to 3.025 quite fast, is it possible that the voltage varies even more but that my fluke 12 don't have the brains to detect it ?
Added a few pictures and a 10MB video showing display behavior.
Video link to photobucket - http://s636.photobucket.com/albums/u...t=MVI_2963.mp4
So what would cause the display to behave like this ? Is this perhaps a psu problem and a cap that shorts to ground ?
When I measure voltage to the display it varies between 3.003 to 3.025 quite fast, is it possible that the voltage varies even more but that my fluke 12 don't have the brains to detect it ?
Added a few pictures and a 10MB video showing display behavior.
Video link to photobucket - http://s636.photobucket.com/albums/u...t=MVI_2963.mp4
Comment