Funky colors on a Sanyo DP50710

[hardfahrer]

I recently put a used SC board in a Sanyo DP50710 and got it to turn on where it would not previously. I pulled up two sample pictures that the set has factory installed and the pictures were not sharp and the color was not right. (See attached pics) I am very novice with this and could use any help in determining what the problem might be and how to go about fixing it. Thanks in advance.

[mmartell]

Re: Funky colors on a Sanyo DP50710

Not sure if that's still a ysus fault or other. But lookup how to run the internal test patterns to rule out the main board being the cause.

[dick_barton]

Re: Funky colors on a Sanyo DP50710

Have you measured all the voltages as given on the PDP panel and do they match.