Hello
I have a strange problem with one acer aspire 5536. When I plugged it into power the leds are on. When I press the power button it seems to power on but I got a black screen.
I reseat the memory and put a new one but nothing.
If I leave it on for 5-10 minutes and then reset it it boots fine.
If I leave it too cool down or try to start it the next day I have the same problem.
I tried to reflow the gpu but I didnt make it.
I have an smd rework station ct-850nd and flux amtech rma-223.
Can you tell if I reflow the wrong chip or how to reflow it correctly?
Thanks in advance.
I have a strange problem with one acer aspire 5536. When I plugged it into power the leds are on. When I press the power button it seems to power on but I got a black screen.
I reseat the memory and put a new one but nothing.
If I leave it on for 5-10 minutes and then reset it it boots fine.
If I leave it too cool down or try to start it the next day I have the same problem.
I tried to reflow the gpu but I didnt make it.
I have an smd rework station ct-850nd and flux amtech rma-223.
Can you tell if I reflow the wrong chip or how to reflow it correctly?
Thanks in advance.
Comment