Thank you to the guys at HEGE supporting Badcaps [ HEGE ] [ HEGE DEX Chart ]

Announcement

Collapse
No announcement yet.

insignia NS-L47Q09-10A no sound or picture

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Re: insignia NS-L47Q09-10A no sound or picture

    A 3.3v power adapter\wall-wart could work, or maybe even a computer PSU, preferably a cheap one that won't care too much about driving a shorted load.
    "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
    -David VanHorn

    Comment


      #62
      Re: insignia NS-L47Q09-10A no sound or picture

      Originally posted by jose6326 View Post
      I need help deciding which board to buy

      My board is 715G3269-1 (TQ9C8 ZK05201)


      The following has the same board number but different bar code number and is missing an hdmi port It was not removed it was manufactured this way

      http://www.ebay.com/itm/291165195578...torefresh=true


      The following has the same board number but different bar code number but is exactly like the board I have

      http://www.ebay.com/itm/261498450350...84.m1423.l2649


      I think either one will work
      Sorry, but I don't know. Hopefully someone else can give better advice on which board would work.
      "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
      -David VanHorn

      Comment


        #63
        Re: insignia NS-L47Q09-10A no sound or picture

        Ok I replaced the main board and now I have the red led on

        But the tv still does not turn on

        Im guessing the main board is good since it turned the led on?

        What else should I test?

        Comment


          #64
          Re: insignia NS-L47Q09-10A no sound or picture

          I guess the power supply is bad or it is not getting the power up signal for some reason

          Could also be a problem with power button itself or remote sensor (I assume you tried both?)

          Could even be another faulty mainboard if it is 2nd hand.
          "Tantalum for the brave, Solid Aluminium for the wise, Wet Electrolytic for the adventurous"
          -David VanHorn

          Comment


            #65
            Re: insignia NS-L47Q09-10A no sound or picture

            Well the main board is good

            I decided to disconnect the tcon from the main board
            I pressed the power button and the red led turned to blue and after 5 seconds the panel flashed

            So I disconnected the power cord reconnected the tcon cable to the main board
            I connected the power cord pressed the power button the tv screen turned on

            The bad news is that the panel is freaking cracked!

            I thought I properly checked it but apparently I did not.
            Luckily I spent 20 bucks on the set but I spent 50 on the main board

            So I guess im going to list the parts on ebay and craigslist

            Lesson learned
            Next time I will do a better job of inspecting the panel


            Thanks for all the help

            Comment

            Working...
            X