A client of mine gave me an HP g6-2000 Series with a broken/hurt screen cable. The screen cable's have been short-cuted for sure, here is a photo:
![](https://cdn.badcaps-static.com/image_cache/a4d11afa7c967d65d5a1d88a9de16866.jpg)
I have replaced the screen cable with a new one, and also a new screen, but i get "white" on screen. At external screen no signal at all.
So, the issue must be of the board. With optical observation i dont see anything burned on board.
Might anyone knows what i should check ?
![](https://cdn.badcaps-static.com/image_cache/a4d11afa7c967d65d5a1d88a9de16866.jpg)
I have replaced the screen cable with a new one, and also a new screen, but i get "white" on screen. At external screen no signal at all.
So, the issue must be of the board. With optical observation i dont see anything burned on board.
Might anyone knows what i should check ?
Comment